Industrial Gray Denim 4 1/2″ Stretched Saddlebags Side...

Description

Color-Matched 4.5 INCH Hard Extended Bags, Rear Fender Extension & Stretched Side Covers

Color: Industrial Gray Denim

Stretched Saddlebags Fit for:

2018-2019

Road King Special

Street Go with the flow Special

Road Glide

Road Go with the flow Special

Ultra Limited Low

Ultra Limited

5″ Rear Fender Extension Fits for: 14-up Harley Touring models with rear fenders equipped with tri-bar lights

Extended Side Covers will not work with saddlebags guards and custom slim seat

This package includes:

. Left & Right Side Saddlebag Bottoms

. Rear Fender Extension

. Rubber Insert Cushions, Grommets & Chromed Metal Plates

. A set of saddlebag knobs

. Left and Right Side Covers

. 6 screws for installation

Outer Dimensions:

Length: 24.6″

Width: 9.4″

Height: 23.2″

Extended Side Covers:

. It features enhanced ABS with PPO material.

. Machined mold provides the most productive and direct-replacement fit for our stretched bags.

. Steel pins with screws thread provide room to adjust the gap between bags and side cover.

. Works with passenger floorboard and larger pegs.

►Fitment◄ Stretched Saddlebags, Rear Fender Extension and Side Covers Fit for: Harley Touring Road King Special 2018, Street Go with the flow Special, Road Go with the flow, Road Go with the flow Special, Ultra Limited Low, Ultra Limited 2019
►Color-Matched◄ Industrial Gray Denim The usage of Factory Color Standards When Mixing the Paint(Man-Made Painting) Saddlebag Bottoms are 24.6″ (L) x 9.4″ (W) x 23.2″ (H). (out of doors dimension measurements)
►These Stretched Side Covers◄ Feature a low bodyline for a very sleek & low profile look that may be designed to match the front edge of your stretched saddlebags.
►4.5 inch Stretched Rear Fender Extension◄ Fills the gap between rear fender and saddlebags. ★ Attention: Ultra and Road King don’t seem to be a right away fit. You should pre drill 3 holes on every side of your fender and use 1/4 – 20 bolts and nylock nuts or use Gorilla Double Sided Tape to install the extension to your bike. You should also remove the fender tip tail light (If your motorcycle is equipped) with a purpose to result in having 3 mounting holes visible on your metal fender.
►What You Get◄ [1]Left & Right Side Extended Saddlebag Bottoms[2]Stretched Side Cover[3]Rear Fender Extension[4]Rubber Insert Cushions, Grommets & Chromed Metal Plates. ★ Find One-Piece Stretched Saddlebag Liners: https://www.amazon.co.uk/dp/B07QTZHJYS